Field of Application

very, very fast cloning tool
easily to use, even from non technicians
clone drives even with defect sectors (as long as a drive is accessible)
supports 1x SATA (also SSD) or IDE source drive
supports 1 x target ports: SATA (also SSD) or host PC
create a 100% 1:1 clone with one cloning operation (multi pass)
supports (tested) SATA adapters for modern storage (SSD), i.e. mSATA,
SD Card, M.2 NGFF, MacBook, Zenbook, Lenovo Carbon Ultrabook etc.

write protection for the source drive
hash calculation for source drive + target drive while cloning
possible standards: MD5, SHA1, SHA224, SHA256, SHA384, SHA512
create . img image files to any int./extern. drive of the host PC

clone drives if still accessible and retrieve data from clone drive.
if a clone doesn’ t show partitions and/or data, use a data recovery software
to surch and retrieve files + folders.
supports: NTFS (all versions), Ext 2/3/4, HFS, HFS+, HFSX, ExFAT, FAT16, FAT32
create + write .img image files to any int./ext. drive of the host PC

create a clone of all original raid drives
mark the original drives + the corresponding clones with the position number
where inserted in the raid hardware
if the original raid hardware is working properly, replace all original drives with
a corresponding clone and then try to rebuild the raid with the on board solution
(if exist) of the raid hardware.
if that doesn’t work, connect the clones in its correct order to a PC and try to
retrieve the data with a special raid data recovery software .

all above points for Data- and Raid Recovery + Forensics
plus repair of defect Windows systems caused from defect drives:
create a 1:1 clone of the defect drive
use the new clone drive to replace the old defect drive and start the computer.
If that doesn ’ t work, try to start the laptop manufacturers Windows recovery, otherwise
install an OEM Windows (corresponding to the license type) + drivers.
Finally copy the customers data from the 2 nd clone to the recovered Windows system.
If the clone doesn’t show partition s or data, you need to use a data recovery software
to surch and retrieve the customers data.